1～15 item / All 70 items
Wavy sponge, commonly known for its use in cushioning materials and car wash sponges.
While passing through a two-tier roller with uneven surfaces, it takes on a unique wave shape by cutting through the center. It is also possible to process materials other than standard products, such as anti-static sponge. The thickness can be accommodated from approximately 10 to 60 mm.
Polycarbonate is a material with excellent impact resistance. We can accept prototype machining of parts that require impact resistance starting from one piece.
Polycarbonate is the only transparent material among general-purpose engineering plastics. It boasts excellent impact resistance, making it suitable for places where acrylic or transparent PVC are not appropriate. The cloudiness of the cut surface can be restored to transparency through polishing.
New Pelka, like other PE foams, can be processed through die-cutting. We accept mass production of die-cutting for SX-150H as cushioning material for electronic components.
The SX-150H is a polyethylene foam infused with carbon. This is an anti-static type. The color is only gray. It protects delicate equipment from static electricity.
Three-sheet is a representative material for sheet gaskets. For gasket production, die-cutting is recommended as it can accommodate large quantities at a low cost.
This is a special material sheet made by ThreeBond Co., Ltd. It contains a viscous substance impregnated in the fibrous material, effectively preventing leaks. We can process items that can be removed, even those that are not rubber or sponge.
Our company stocks NR in the factory and uses it for die-cutting. We also accept tape processing along with die-cutting using natural rubber.
NR has what is known as the most rubber-like elasticity, excellent wear resistance, cold resistance, and mechanical properties, and it is also easy to process, which is a great advantage. Double-sided tape can also be applied to the back side. We have stock materials available in various thicknesses, so please feel free to consult with us.
Urethane rubber with a hardness of 90 is a strong rubber that is resistant to abrasion. Urethane is poured in liquid form, solidified, and then shaped through machining.
Urethane rubber is a type of rubber that excels in wear resistance and mechanical strength. It is cast into a certain size and then machined down. Additionally, urethane comes in a range of hardness, from hard to soft, and can also be colored.
This is a cork stopper used for laboratory equipment and similar purposes. The flat shape can be processed by cutting. There are stoppers made of rubber and other materials that can also be processed by cutting.
Cork is characterized by its excellent insulation, heat retention, moisture absorption, and sound absorption properties, as well as its elasticity and resistance to corrosion and deterioration. There are both natural cork and synthetic cork. It is commonly known for use in wine stoppers and bulletin boards, and since it is bonded with an adhesive that has the same softness as fine wood chips, thin materials do not break down significantly during processing. You can check the grain size in the sample book.
Bushings are often made of highly abrasion-resistant urethane rubber. They are initially molded into rough sizes and then finished through machining.
This is a process where urethane rubber is poured into a mold and solidified, followed by machining with a lathe or router end mill. It is particularly excellent in wear resistance and weather resistance, has very strong tear resistance, and also possesses oil resistance, making it suitable for outdoor use and machine integration. It has a wide range of hardness, typically from 50° to 90°, with a proven track record in processing.
We are bonding the highly heat-resistant Si-300 with the compatible 8625HPW. The 8625HPW is a tape for difficult-to-adhere silicone.
The Si-300 is a silicone sponge made by San Polymer Co., Ltd., with a hardness of 30° and available in red and black colors. Due to its independent bubbles, it exhibits excellent sealing properties. It also complies with food sanitation laws and has heat resistance. The double-sided tape used is suitable for silicone materials, specifically DIC Corporation's #8625HPW.
PEEK has the highest class of heat resistance and strength among resins, and there are reinforced versions with carbon and other materials. We accept inquiries for machined products made from high heat-resistant and high-strength materials.
Polyether ether ketone is a representative of super engineering plastics. Although it is expensive, it is a highly functional material. It has top-class heat resistance among thermoplastic resins and also excels in mechanical strength and chemical resistance. We mainly handle machining, so please feel free to consult with us.
This is a surface partition using coat ball. Please feel free to consult us about cutting processes such as partitions and thread winding.
Coated board is a thick paper with a smooth white surface and a rough gray back. The white side is suitable for printing. It is a material widely used in general paper packaging. The thickness varies depending on the weight, and equivalent products can be researched from the actual item.
NBR is often processed using die-cutting for oil-resistant gaskets. Rubber pads are manufactured using a flat processing method, which allows for efficient die-cutting.
Nitrile rubber is a representative of oil-resistant rubber and also has good abrasion resistance and aging resistance. We use No. 7783 from Terauchi Manufacturing Co., Ltd. for double-sided tape. We have stock available in various thicknesses, so please feel free to consult with us.
We will create the specified thickness by laminating with Sekisui Chemical's Softlon S. There will be no misalignment during the cutting process after lamination.
Softron is a polyethylene foam sheet that excels in insulation and water resistance, and is very lightweight. It is also strong against chemicals and solvents, making it suitable for chemical-related applications. To achieve the desired thickness, we have devised a method of laminating 2t to create a 4t thickness.
Polyca performs both machining and injection molding. Please use machining for the production of small parts like hooks.
Abbreviated as polycarbonate, it is a resin that excels in impact resistance among high-transparency resins. Due to its high insulation resistance and dielectric strength, it is also used in electrical products. It is commonly seen in discs such as CDs and DVDs.
Transparent PVC is a material suitable for adhesive processing. We accept adhesive processing even for large machine covers.
This is a transparent variant of the commonly seen gray PVC. It is an inexpensive material that is easy to process through bending, welding, and gluing, and is used in a wide range of fields. It has excellent chemical resistance and weather resistance, and its flame retardant properties help prevent the spread of fire. It is finished by gluing in a U-shape.
